Triax SR 110, Руководство по эксплуатации

Страница: 8 / 50

8
Read through the safety instructions carefully, before you start
operating the receiver.
Pay attention to all warnings and information on the device and in the operating
manual.
Electrical connection
Disconnect the receiver from the mains socket if there is an operating malfunction.
Note: in spite of turning off the power switch on the back, the receiver is still powered
up.
To avoid the risk of fire and of an electric shock, do not expose the receiver either to
rain or Other humidity.
Never open the housing. Otherwise there is the risk of an electric shock.
Only connect the receiver to a professionally installed 100-240V, 50-60 Hz mains
power socket.
The total LNB power consumption must not exceed 300 mA.
Disconnect from mains supply when not in use for a long period of time.
During thunderstorms disconnect the mains plug of the receiver from the power
socket.
If foreign bodies or liquid should get into the receiver, disconnect the mains plug from
the power socket immediately.
Safety Instructions
43
Trouble Shooting
Symptom Possible cause and remedy
Can't find satellite, or no
signal Example: ASTRA 19E
Key 1 (Pre-programming: "The First“)
INFO key ("The First“, FR11837)
Both signal AND quality are 0 %
Align vertical mirror to the south.
Turn a few millimetres to the left, wait about 3
seconds, then repeat until both signal AND quality
are shown.
With a signal of about 60 %, the black background will
disappear, and a TV image will appear.
For a different satellite, please select a current pro-
gramme from the pre-programmed channel list, then
press the INFO key.
Front display dark,
no clock time visible Power cable not connected.
Connect the power cable to the mains socket.
Switch on main switch.
Short circuit at the aerial supply possible: Check
connections.
Clock time visible Receiver is in standby mode.
Press the POWER key on the remote control unit (or
on the receiver). The receiver will switch on and the
programme will be shown on the TV screen.
No sound or picture, but
menu displays of the
receiver present. The aerial is not aligned with the satellite.
Align your Satellite Dish
No signal (with symbol).
Check the cable connection from LNB to
receiver and from receiver to the connected units.
Align your Satellite Dish.