- 6 -
CGS 470
Signal transfer principle:
The prepared input signals are fed to the modulator module via the AV in-
terface. From there, they are fed to the HF output collector of the head-end
station, through which the level of the output signal can be adjusted via the
software in the head-end station.
The digital module operating software can be updated using a PC or note-
book and the software "
BE-Flash
" via the 9-pin D-SUB socket on the head-end
station. You can find the current operating software for the digital module,
the software "
BE-Flash
" and the current assembly instructions on the website
"
www.triax.com
".
This digital module is designed exclusively for use in the CSE 2800 head-end
station.
Channel strip "A"
Channel strip "B"
Channel strip "C"
Channel strip "D"
CA module
TUNER
"
A
"
TUNER
"
D
"
