- 10 -
CGS 470
• Install the appropriate modulator module.
—> Figure 5 shows the slots 1 (digital module) and 2 (modulator mod-
ule). The slot between them (without a contact strip on the board at
the rear wall of the housing) is for an add-on module only.
E
C
D
1
• After installing the modules close the locking device
1
in direction of the
arrow.
3.4 C
onneCting
the
digital
module
• Connect SAT-IF inputs
C
of the digital module to the preinstalled F termi-
nals in the rear wall of the head-end station via the cable inlets
E
using HF
cables made on-site (length approx. 80 cm) or if applicable to one of the
outputs of a retrofitted SAT-IF input distributor.
• Using the ribbon cable
D
to connect the AV output of the digital module to
the AV input of the modulator module.
