- 12 -
CGS 470
5
p
rogramming
5.1 p
repar ation
• Connect the digital module to a programmed modulator module.
—> For the programming of the output channels please read the assem-
bly instructions of the corresponding modulator module.
• Connect the test receiver to the HF output on the modulator module.
• Adjust the test receiver to the output channel of the channel strip to be set:
Digital module – channel strip "
A
" —> modulator module – channel strip "
A
",
Digital module – channel strip "
B
" —> modulator module – channel strip "
B
",
Digital module – channel strip "
C
" —> modulator module – channel strip "
C
",
Digital module – channel strip "
D
" —> modulator module – channel strip "
D
".
• Switch on the modulator if necessary. For each modulator, there is a green
LED which indicates if the modulator is switched on.
LED – Channel strip “A“
LED – Channel strip “B“
LED – Channel strip “C“
LED – Channel strip “D“
