![background image](http://html1.mh-extra.com/html/triax/ccs-2-1002/ccs-2-1002_assembly-instructions-manual_1160864025.webp)
- 25 -
CCS-2 1002
—> All stations from the channel strip will be read, and then displayed
with name and station type.
—> If no station is found, the following error message will appear in the
display: "
FILTER no Service
".
In this case, check the configuration of the antenna system and
head-end station, as well as the previously adjusted settings for the
cassette and the components connected to the ASI input.
—> The display shows e.g.:
Bx 4A TV + 01/06
Das Erste
Meaning of the indicators in the example:
"
Bx 4A
"
Slot 4, channel strip "
A
"
"
TV
"
TV channel type
"
+
"
The currently selected station is switched on.
"
01/06
"
The 1st of 6 stations is being displayed.
"
Das Erste
"
Station name
Further possible terms displayed:
"
RA
"
Radio channel type
For radio stations, the background of the screen of the
connected TV or test receiver is darkened.
"
–
"
The currently selected station is switched off.
"
*
"
The star means that the TV or radio station selected is
encoded. To enable the stations, the CA module and
the appropriate smart card of the station provider are
required.
—> If a service number (e.g. "
131
") appears instead of "
TV
" or "
RA
",
this indicates that an unnamed station or an undefined data stream
is being received.
• Use the
buttons to call up the stations in sequential order, then use
to activate (indicated by "
+
") or to deactivate them (indicated by
"
–
").
Factory default: All stations are deactivated.
• Press the
button.
• Set the station filter of channel strip "
B
" in the same way as channel strip
"
A
".
• To save changes and to activate the station filters press the
button.