![background image](http://html1.mh-extra.com/html/triax/ccs-2-1002/ccs-2-1002_assembly-instructions-manual_1160864018.webp)
- 18 -
CCS-2 1002
5.4 P
rogr a mming
the
Casset te
—> Pressing the
button for longer than 2 seconds cancels the
programming procedure. This takes you back to the programme
item "Selecting the cassette" from any menu. Any entries that have
not been saved are reset to the previous settings.
—> Entries in the menus can be saved by pressing the
key. You are
taken back to the "Selecting the cassette" menu item.
• Switch on the head-end station
—> The display shows the software version (e.g. V 44)
—> The processor reads the cassettes‘ data (approximately 10 sec-
onds).
BE–Remote
please wait …
V 44
t > 10 s
Ein / On
s
eleCting
the
Casset te
Box 1
..............
..............
..............
Box 5
..............
..............
..............
+
Box 4
V 27
B
DVBS2-TPS
COFDM – – –
• Select the cassette you want to programme (e.g.
Box 4
) by repeatedly press-
ing the button
if necessary.
—> The display shows e.g. the menu :
Box 4 DVBS2-TPS
V27 COFDM
"
Box 4
"
stands for slot 4
"
DVBS2-TPS COFDM
" Type of cassette
"
V 27
"
Software version of the cassette
• Press the
button.
—> The "Selecting the channel strip" – "
LINE
" menu is activated.