![background image](http://html1.mh-extra.com/html/triax/ccs-2-1002/ccs-2-1002_assembly-instructions-manual_1160864026.webp)
- 26 -
CCS-2 1002
—> The filter is activated.
The display shows "
PROGRAM Filter on
".
—> If stations are activated the corresponding PIDs (audio, video, text)
are inserted into the data stream and the PAT and SDT tables are
updated.
Test the status of the individual stations:
If the filter is switched on, press the button. In this mode you can test the set-
tings of the station filters again or change them if necessary.
• In the "
PROGRAM Filter on
" menu the station filters switched on can be
switched "
off
" using the buttons
if necessary.
• Press the
button.
—> The "Output signal" – "
COFDM-MODE
" menu is activated when the
channel strips "
A
" without a CA module installed and "
B
" are pro-
grammed. Please take note of the tables below before setting the
COFDM parameters.
—> Programming the channel strip "
A
" with a CA module installed the
settings for the CA module are activated (see page 40).