21
- 21 -21
Installation
– Smartcard Reader
The Digital-Receiver is optionally equipped with a smartcard reader.
With an equal smartcard it is possible to unscramble encoded channels.
The smartcard can be inserted also while the receiver is switched on.
Insert the smartcard (golden chip on lower side towards the receiver) carefully into the slot at
the front panel of the receiver.
To open the menu of the smartcard, first select “Installation” in the main menu and press
OK
to confirm.
A submenu generated by the smartcard appears
on the screen. e.g. Conax or CryptoGuard.
Select the submenu of the smartcard with
or
and
press
OK
to confirm.
For more information on using the smartcard, see the menus
shown or it´s instruction manual.
After the smartcard is inserted, the encoded
programmes will be unscrambled.
Installation
Channel search
Factory reset
Software download
Conax
