Installation
17
- 17 -17
Installation
In the main menu, select the line
Installation
using
and confirm with
OK.
The Installation menu
will appear:
Use the buttons
to make your selection and
confirm with
OK.
Installation
– channel search
You can choose between automatic (antenna) and manual (transponder) channel search.
The automatic channel search checks the whole VHF and UHF range for programmes you
can receive.
Automatic channel search
In the Installation menu, move the cursor using the buttons
onto the line
Channel search
and press the
OK
button. The following menu will appear:
Performing an automatic channel search
Select the line
Antenna
using
and
Terrestrial
using the ◄ or ► buttons.
Select the line
Search mode
using
and
Antenna
using the ◄ or ► buttons.
In the line
Encrypted,
select whether the channel search should also include encrypted
channels, using the ◄ or ►
buttons.
No
= encrypted channels will be ignored.
Yes
= encrypted channels will be included in the search.
Move the cursor onto the line
Start scan
using the
buttons and start the search process
by pressing the
OK
button.
Now two windows are shown, listing the newly found TV and radio programmes. The “Status”
window shows how far the search has progressed.
- Display:
Scanning
=> Search is active
- Display:
Complete
=> Search is finished.
You can leave this menu by pressing
EXIT
. If not finished, the channel search algorithm is
aborted. If new channels are found, you are asked to store them (
Yes
). Select your choice by
◄/► and confirm with
OK
. If selected YES the new channels are stored at the end of the
channel list now.
Installation
Channel search
Factory reset
Channel search
Antenna
Search mode
Encrypted
Modulation
Symbolrate
Cable
automatically
No
QAM 64
6.900MS
Start scan
