Start and Display
Carries out a self-check, (The dotted line displays the progress of the self-check
from left to right).
Wait 5 seconds or push any key to display the main menu
Main Menu Display
There are 4 functions to select from the main menu:
Wire Map – This wiring diagram measurement is to check end to end continuity of
cables, (M, L and R), and locate errors.
Pair and Length – Pair and length measurement to verify cable length, pen circuit
distance, pairing and cross-talk interference.
Coax/Tel – Coaxial cable and telephone line measurement to check continuity and
indicate open circuit and short circuit faults.
SETUP – Calibrate and set up the Network Cable Tester.
Within the main menu display, press the
p
or
q
keys to move the cursor “->” up or
down to the required item and press the ‘PAIR&L’ key on the front panel to enter the
related test function.
Operation Procedures
5
