Tri-Clover Tri-Flo CL Series, Руководство по обслуживанию и установке

Страница: 19 / 43

- 19 -
3. Install front gasket (11), stationary seal (12), rear gasket (11) and seal gland (10) into
casing (1) using Allen screws (9) and washers (38). Torque the screws to 72 lb-in (8
Nm). For the CL4311 and the CL6410, torque the screws to 60 lb-in (7 Nm). NOTE: A
rear elastomer gasket is required when using a front PTFE gasket.
4. Install two screws (23) securing stuffing box (22) to casing.
5. Install pin (19) into stainless steel drive collar (18) as required.
6. Install o-ring (5) into stainless steel drive collar (18).
7. Install o-ring (5) into rotating seal (15).
8. Install spring (16) onto rotating seal (15) and onto stainless steel drive collar (18).
MAINTENANCE
38
9
20
22
10
11
12
11
1
23
Torque screws to 72 lb-in (8 Nm).
For the CL4311 and 6410, torque screws to 60 lb-in (7 Nm).