11
Don’t immerse appliance in water or liquids. In any case,
avoid splashing of water or liquids.
Put the appliance on stable shelves and floors
Do not insert any metal object into the product. Do not
use lubricants and lubricating oils of any kind on this unit.
When using the vacuum function, press firmly on the bag
to get a better result.
Do not wash sealing cover with water and/or detergent, it
would jeopardize the functionality of the device.
Open the lid of the appliance using the appropriate
switches on the sides of the unit. Do not force it
manually, it would damage the appliance.
Do not insert your fingers, hair, or any part of the body
below the vacuum press.
DESCRIPTION VT75
1 Seal button (SALDA)
2 STOP/Cancel button
3 Vac/Seal dry (SECCO)
4 Vac/Seal moist (UMIDO) 5 Pulse button (IMPULSI)
6 Canisters button (CONTENITORI)
7 Sealing strip
8 High temperature tape
9 Vacuum chamber
10 Release button
11 Vacuuming hole
12 Closing locks
13 Gaskets
14 Cutter
15 Roll compartment
16 Cord connector
MAIN FUNCTIONS
The main function of this unit is to vacuum and seal a wide variety of foods, keeping them fresh for longer
while preserving flavours and aromas. With the vacuum model VT75 you can easily:
Bake in individual portions or entire meals in advance to consume later, by heating them directly into the bag.
Prepare food for picnics and camping trips or barbecues.
Eliminate freezer burn, by simply sealing all foods before freezing them.
Eliminate bulky packaging of meat, fish, poultry and vegetables before you freeze or refrigerate.
Store pre-packaged foods (i.e. for diets with special needs).
Protect a wide variety of valuable items such as photos, important documents, stamps, collections, collections
of books, cards or comics, etc… hardware such as screws, nails, rivets and
bolts, or keep medicines, bandages and other elements of first aid kit.
OPERATING THE UNIT
To ensure best performance, use bags and rolls with opening up to 30cm.
1. SEALING
Use this function with vacuum rolls, where both sides are opened.
-
Put a vacuum roll in the roll compartment (15).
-
Lift up the cutter (14) and unwrap a piece of roll.
-
Bring the cutter pin on the left, lower the cutter over the roll and move the pin to the right pushing on it.
-
Take the power cord, connect the plug to a suitable power socket (AC230V), the connector to the socket
(16) on the back of appliance. Place a side of the cutted bag over the rubber strip (8), then close lid.
-
Press the lid down firmly on both sides by using both hands until it clicks in position (see Fig.2).
-
Press the “Salda” button (1), button light switches on; when it goes out, sealing process is finished.
