11
CMP 574USB
ENGLISH
6
RADIO RECORDING
A.
Install blank cassette tape.
B.
Set FUNCTION SWITCH to “RADIO” position. After selecting the desired band
and tune the TUNING KNOB to desired broadcast station. Then push down
RECORD BUTTON and PLAY BUTTON simultaneously.
C.
After recording the desired broadcast, depress the STOP/EJECT BUTTON lightly,
and then set FUNCTION SWITCH to “TAPE” position in order to listen to the
recorded broadcast.
D.
Press REW button then play button to playback your recording.
ERASURE: When you record over previously recorded tape, the original recording
is automatically erased and replaced by the new recording.
CD/MP3 RECORDING
A.
Install a blank tape into cassette compartment.
B.
Set the FUNCTION switch to “CD/MP3/USB” position. Load a disc into the disc
compartment, start playback by pressing the PLAY/PAUSE/USB button after
the unit finished reading the disc.
C.
Depress the RECORD BUTTON and PLAY BUTTON simultaneously. Recording
starts. Press the STOP/EJECT BUTTON lightly to end recording, or the unit will
stop recording automatically while the tape reaches its end.
D.
To listen to the recording, set the FUNCTION switch to select “TAPE” playing
mode, then start tape playback.
TYPES OF CASSETTE
Use only good quality cassettes (IEC TYPE 1) for making recordings. May be used
to replay other types of cassette but is unable to make proper recording on these
more specialized tapes.
The use of C120 cassettes is NOT recommended in this machine.
PROTECTING RECORDING
Normally, anything recorded on the tape is automatically erased when new
recording is made. It is possible to protect your recording from accidental erasure
by removing the tabs found on the rear of the cassette.
When the cassette is held with the recorded side upper-most and exposed tape
facing the front, the protective tab will be found on the left rear of the cassette.
All pre-recorded cassette are protected in this way to prevent accidental erasure
of the commercial recording. “Protected” cassette will prevent the record button
from being operated. If at any time you attempt to record and find that this
button will not depress, never force the mechanism or it may be damaged. Check
that a cassette has been loaded and that tab has not been removed. Recording on
a cassette from which the tabs have been removed can be done by covering the
tab openings with a piece of adhesive tape.
ERASE TAB
FOR SIDE “A”
Содержание CMP 574 USB
