Trevi CMP 574 USB, Руководство пользователя

Страница: 10 / 32

10
CMP 574USB
ENGLISH
5
for 15 minutes, the unit will automatically switch into standby mode. To turn on
the unit again, press "STANDBY" button or replug the unit.
ESD hints – The product maybe reset or not reset to operation of control due to
electrostatic discharge, just switch off and reconnect again.
TO ADJUST VOLUME
Rotate the VOLUME CONTROL back and forth to increase and decrease volume.
TO ENJOY MORE BASS
Depress BASS button to have more extra bass, press again to switch off bass.
HEADPHONES
For private listening, plug the headphones/earphones (not included) into
PHONES jack (3.5 mm diameter).
CAUTION: To prevent possible hearing damage, do not listen at high volume
levels of long periods.
USING THE RADIO
TUNING IN RADIO STATIONS
1. Slide the FUNCTION switch to "RADIO" position.
2. Slide the BAND switch to select the desired wave band: AM/FM ST.
3. Tune to required station by rotating the TUNING KNOB.
4. Rotate the VOLUME CONTROL to comfortable volume level.
5. Extend the TELESCOPIC ANTENNA to its full length if you are listening to FM
broadcasting. Gently rock the unit back and forth to get the best reception
when you are listening to AM program, or place the unit in an open place.
Note: The FM STEREO indicator will be on if you are receiving FM stereo
program.
6. Turn off the radio, Set the FUNCTION switch to CD/MP3/USB or TAPE
operation, or switch off the unit by pressing the STANDBY button.
CASSETTE OPERATION
PLAYBACK OF CASSETTE
Be sure to tighten any slack tape in the cassette before use, using either a pencil or
a ball-point pen, simply insert the pen or pencil into the centre of spool and rotate
to remove slackness. Depress the STOP/EJECT button to open the cassette door.
Insert the cassette into the compartment with the open end facing upwards and
the full reel on the left hand side, push the cassette well down and close the door,
be sure not to touch the tape surface, Set the Function switch to “TAPE” position
and press the cassette play button. To stop playback, press the STOP/EJECT
button once. To release the cassette, press the STOP/EJECT button again.
AUTO STOP
When the tape reaches the end during playback or recording, the built-in auto
stop system will release the depressed play, record keys. The auto stop system
operates while recording from the built-in radio or CD player, only the cassette
function is brought automatically to stop mode and the radio or CD Player will
continue to play.