Trenton NTM6900, Техническое описание

Страница: 64 / 158

Motherboard Installation NTM6900 / WTM7026 Technical Reference
Security Setup
When you select
Security
from the BIOS Setup Utility Main Menu, the following Setup screen displays:
Main Advanced PCIPnP Boot | Security | Chipset Exit
Security Settings
_________________________________________________
Supervisor Password :
Not Installed
User Password : Not Installed
Change Supervisor Password
Change User Password
Boot Sector Virus Protection [Disabled]
V02.67 (C)Copyright 1985-2009, American Megatrends, Inc
.
Install or Change the
password
←→ Select Screen
↑↓ Select Item
Enter Change
F1 General Help
F10 Save and Exit
ESC Exit
BIOS SETUP UTILITY
Security Setup Screen
When you display the Security Setup screen, the format is similar to the sample shown above. Highlight the
option you wish to change and press
<Enter>
.
NOTE:
The values on this screen do not necessarily reflect the values appropriate for your SHB. Refer to
the explanations below for specific instructions about entering correct information.
S
ECURITY
S
ETUP
O
PTIONS
The Security Setup options allow you to establish, change or clear the supervisor or user password and to
enable boot sector virus protection.
The descriptions for the system options listed below show the values as they appear if you have not
changed them yet. Once values have been defined, they display each time the BIOS Setup Utility is run.
C
HANGE
S
UPERVISOR
P
ASSWORD
This option allows you to establish a supervisor password, change the current password or disable the
password prompt by entering a null password. The password is stored in CMOS RAM.
If you have signed on under the user password, this option is
not
available.
TRENTON Technology Inc. 8-4-6