Trenton NTM6900, Техническое описание

Страница: 55 / 158

NTM6900 / WTM7026 Technical Reference Motherboard Installation
When password checking is enabled, the following password prompt displays:
Enter CURRENT Password:
Type the password and press
<Enter>
.
NOTE:
The null password is the system default and is in effect if a password has not been assigned or if
the CMOS has been corrupted. In this case, the password prompt does not display. To set up passwords,
you may use the
Change Supervisor Password
and
Change User Password
options on the Security
Menu of the BIOS Setup Utility. (See the
Security Setup
section later in this chapter.)
If an incorrect password is entered, the following screen displays:
Enter CURRENT Password: X
Enter CURRENT Password
You may try again to enter the correct password. If you enter the password incorrectly three times, the
system responds in one of two different ways, depending on the value specified in the
Password Check
option on the
Security
Menu:
1) If the
Password Check
option is set to
Setup
, the system does not let you enter Setup, but does
continue the booting process. You must reboot the system manually to retry entering the
password.
2) If the
Password Check
option is set to
Always
, the system locks and you must reboot.
After rebooting, you will be requested to enter the password. Once the password has been entered correctly,
you are allowed to continue.
4-3 TRENTON Technology Inc.