Trenton NTM6900, Техническое описание

Страница: 136 / 158

Boot Setup NTM6900 / WTM7026 Technical Reference
CPU Bridge Configuration
When you select
CPU Bridge Configuration
from the Chipset Setup Screen, the following Setup screen
displays:
Main Advanced PCIPnP Boot Security | Chipset | Exit
CPU Bridge Chipset Configuration
CPU Revision : B1
Current QPI Frequency : 5.866GT
Current Memory Frequency : 1066 MHz
QPI Links
[Full-Speed]
QPI Frequency [Auto]
QPI L0s and L1 [Disabled]
Memory Frequency
[Auto]
Memory Mode [Independent]
Demand Scrubbing [Enabled]
Patrol Scrubbing [Enabled]
Throttling – Closed Loop
[Enabled]
Hyster temp [1.5° C]
Guardband temp [006]
Inlet temp [070]
Temp Rise [020]
Air Flow [1500]
Altitude [Sea Level or Below]
DIMM Pitch [400]
Inlet temp [070]
Temp Rise [020]
Air Flow [1500]
Altitude [Sea Level or Below]
DIMM Pitch [400]
RED onl
Throttling – Open Loop [Disabled]
Note: Options in y display if Throttling settings are Enabled.
V02.67 (C)Copyright 1985-2009, American Megatrends, Inc
To transition the QPI
links to full-speed of
leave them in slow-mode
←→ Select Screen
↑↓ Select Item
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit
BIOS SETUP UTILITY
CPU Bridge Configuration Screen
When you display the CPU Bridge Configuration screen, the format is similar to the sample shown above.
Highlight the option you wish to change and press
<Enter>
to display the available settings. Select the
appropriate setting and press
<Enter>
again to accept the highlighted value.
TRENTON Technology Inc. 8-4