Trenton NTM6900, Техническое описание

Страница: 142 / 158

Boot Setup NTM6900 / WTM7026 Technical Reference
South Bridge Configuration
When you select
South Bridge Configuration
from the Chipset Setup Screen, the following Setup screen
displays:
Main Advanced PCIPnP Boot Security | Chipset | Exit
South Bridge Chipset Configuration
USB Functions [12 USB Ports]
USB Port Configure [6X6 USB Ports]
USB 2.0 Controller [Enabled]
HDA Controller [Enabled]
SMBUS Controller [Enabled]
SLP_S4# Min. Assertion Width
[4 to 5 seconds]
Restore on AC Power Loss [Power Off]
SATA Master Break Event [Disabled]
PCIe Ports Configuration
PCIe Port 0
[Auto]
PCIe Port 1 [Auto]
PCIe Port 2 [Auto]
PCIe Port 3 [Auto]
PCIe Port 4 [Auto]
PCIe Port 5 [Auto]
PCIe High Priority Port [Disabled]
PCIe Port 0 IOxAPIC Enable
[Disabled]
PCIe Port 1 IOxAPIC Enable [Disabled]
PCIe Port 2 IOxAPIC Enable [Disabled]
PCIe Port 3 IOxAPIC Enable [Disabled]
PCIe Port 4 IOxAPIC Enable [Disabled]
PCIe Port 5 IOxAPIC Enable [Disabled]
Options
Disabled
2 USB Ports
4 USB Ports
6 USB Ports
8 USB Ports
10 USB Ports
12 USB Ports
←→ Select Screen
↑↓ Select Item
+- Change Field
F1 General Help
F10 Save and Exit
ESC Exit
BIOS SETUP UTILITY
V02.67 (C)Copyright 1985-2009, American Megatrends, Inc
South Bridge Configuration Screen
When you display the South Bridge Configuration screen, the format is similar to the sample shown above.
Highlight the option you wish to change and press
<Enter>
to display the available settings. Select the
appropriate setting and press
<Enter>
again to accept the highlighted value.
S
OUTH
B
RIDGE
C
ONFIGURATION
O
PTIONS
The descriptions for the system options listed below show the values as they appear if you have not yet run
Chipset Setup. Once values have been defined, they display each time Chipset Setup is run.
USB Functions
This option specifies the number of Universal Serial Bus (USB) ports to be used.
The Setup screen displays the system option:
TRENTON Technology Inc. 8-10