TRENDnet TW100-BRV214 Скачать руководство пользователя

Страница: 43 / 82

TRENDnet User’s Guide

TW100-BRV214

3. Review the DHCP Server settings.

•

DHCP Server

– Enable or Disable the DHCP server.

•

IP Pool Starting Address

– Changes the starting address for the DHCP server

range. (e.g.

192.168.10.20)

•

IP Pool Ending Address

– Changes the last address for the DHCP server range.

(e.g.

192.168.10.30)

Note: The Start IP and End IP specify the range of IP addresses to automatically

assign to computers or devices on your network.

•

Lease Time

– Enter the lease time in seconds that DHCP client will hold their

automatically assigned IP address before requesting a new IP address.

•

Domain Name (Optional)

– Specifies a domain name to assign to computers or

devices. (e.g.

trendnet.com

)

Note: The DHCP lease time is the amount of time a computer or device can keep an

IP address assigned by the DHCP server. When the lease time expires, the computer

or device will renew the IP address lease with the DHCP server, otherwise, if there is

no attempt to renew the lease, the DHCP server will reallocate the IP address to be

assigned to another computer or device.

4. To save changes, click

Save

at the bottom of the page.

Note: If you would like to discard the changes, click Undo before you click Save.

Note: Clicking the More>> option will allow you to configure additional parameters for

your DHCP server on your router to assign to computers or devices on your network.

Clients List

– If you click

Clients

List, you can view the list of active lease entries for

computers or devices that have been assigned IP addresses automatically from the

DHCP server on your router.

Содержание TW100-BRV214



















































































Результаты поиска

Содержание TW100-BRV214

Отзывы:

Похожие инструкции для TW100-BRV214

Бренды по названию

Популярные бренды

TRENDnet TW100-BRV214, Руководство пользователя

Результаты поиска

Содержание TW100-BRV214

Отзывы:

Похожие инструкции для TW100-BRV214

Бренды по названию

Популярные бренды