TRENDnet TVP-221H, Руководство пользователя системного интегратора, Страница: 29 / 59

on Set H323 Fast start mode on
off
Set H323 Fast start mode off
The default setting is off.
36 set h323 nat_call {on|off}
When the TVP-224HR is installed in a network that connects to WAN via a
router with Network Address Translation (NAT) feature, the NAT might
block calls. The
set h323 nat_call command is used to enables the TVP-
224HR to connect to remote TVP-224HRs connecting to WAN via NAT
capable router.
Syntax Description
on Enable.
off Disable.
The default setting is on.
37 set h323 out_fast_start {on|off}
The set h323 out_fast_start command is used to select the H.323 Fast start
mode on for calls making toward remote TVP-224HRs.
Syntax Description
on Set H323 Fast start mode on
off
Set H323 Fast start mode off
The default setting is off.
38 set h323 rtp_port_base port_base
The set h323 rtp_port_base command is used to select the starting port
number for assignment of RTP ports. When a calls are made to remote TVP-
224HRs, an RTP port is opened for each call. The TVP-224HR uses the
port_base as the RTP port number for the first call, the next call uses the next
successive port, and so on.
Syntax Description
port_base The starting port number for the assignment of
RTP port. If rtp_port_base is assigned a value
of 0, the assignment of port number will be
dynamic. The port number can be specified
from 0 to 32767. Typically, numbers from 0 to
1023 are reserved on most systems. The
recommended value is 30000.
Example
The following example sets RTP base port number to 30000.
Console> set h323 rtp_port_Base 30000