manualshive.com logo in svg

TRENDnet TVP-221H, Руководство пользователя системного интегратора, Страница: 20 / 59

Поделиться
Скачать
TRENDnet TVP-221H Скачать руководство пользователя страница 20

11

 

net set wan ip_tos <p> <d> <t> <r> 

The TVP-224HR Wan side allows you to set the 3-bit IP precedence field in 
the IP header for all the voice packets it sends out. Use the 

net set wan ip_tos

 

to set the IP precedence field. 

Syntax description 

ip_preced 

The IP precedence to be assigned to all the 
voice packets sent by the TVP-224HR. The IP 
precedence must be in the range of 0 through 
7. 

 

Note: 

The new setting will not take effect until the TVP-224HR is reset. 

 

12

 

net set wan dns <pri_server> <sec_server> 

The TVP-224HR Wan side allows you to specify the DNS servers for the 
WAN interface. Up to two DNS servers. Use the 

net set wan dns

 command to 

set the DNS servers. 

Syntax description 

pri_server 

Primary DNS server for the WAN interface  

sec_server 

Secondary DNS server for the WAN interface. Optional 

 

 

 

13

 

net set wan speed <10 | 10f | 100 | 100f | 10/100 | 10/100f> 

The TVP-224HR Wan side allows you set the link speed for its Ethernet 
interface. Use the 

net set wan speed

  command to set the Ethernet link speed. 

Syntax description 

10 

Fixed the Ethernet speed at 10 Mbps 

100 

Fixed the Ethernet speed at 100 Mbps 

auto 

Enable the 10/100 Mbps auto-negotiation capability. 

 

14

 

net set lan ip <addr> 

Use the 

net set lan ip

 command to assign an Static IP address to the TVP-

224HR Lan side. 

Syntax description 

ip_addr 

The IP address of the TVP-224HR. 

 

Note 

The new IP address will not take effect until the TVP-224HR is reset. 

Содержание TVP-221H




























































Отзывы:

Нет отзывов