TRENDnet TVP-221H, Руководство пользователя системного интегратора, Страница: 15 / 59

2.2 Connection through Telnet
To use Telnet, Internet Access must have been previously setup so that the gateway is
visible on the internet (See User Guide for More Information). Alternatively, you can
use Telnet to locally access the TVP-224HR and the TVP-224HR and your computer
are in the same network segment. Up to two sessions through Telnet are possible. To
access the TVP-224HR from a remote host with Telnet, perform the following tasks:
To access the TVP-224HR Gateway from a remote location using Telnet, perform the
following tasks:
Task Prompt Type
Open the windows command prompt and enter the
telnet command followed by the IP address of the TVP-
224HR Gateway you want to access.
None
telnet
xxx.xxx.xxx
When the TVP-224HR Gateway prompts you to Login ,
enter the user name "admin”
Login: admin
When the TVP-224HR Gateway prompts you for
Password , enter the password. “Console>” will appear.
The default password is "123" but it is recommended that
the password be changed for security considerations.
The password can be changed from the Web Browser
Administration / Password submenu page.
Password: 123
Type in “ping xxx.xxx.xxx”, where xxx.xxx.xxx is your ISP
provided DNS Server IP or any known Public Internet
Address. The following dialogue confirms Internet
Access
Console>ping 168.95.1.1
ping <168.95.1.1>: 56 data bytes
168.95.1.1 is alive
If the ping times out, you do not have Internet Access or
the Public IP Address you pinged is incorrect. Try
another IP Address. If you confirm that you do not have
Internet Access, please refer to the trouble shooting
section of the User Manual or consult your ISP to make
sure your Internet Access Data is correct and accurately
entered into the TVP-224HR.
Console>
ping
xxx.xxx.xxx