Page 9
TCP/IP
Obtain an IP Address
automatically
(DHCP Client)
If you have a DHCP or Bootp server on your LAN,
you can enable this setting. The Disk Server will then
obtain its IP Address from the DHCP or Bootp server.
However, because this is a Server, it is preferable to
use a
Fixed IP Address
.
If your LAN does not have a DHCP server, then you
must
select
Fixed IP Address
.
Fixed IP Address
:
Select this option to enter an IP Address. This option
is required if you wish to use the DHCP Server func-
tion.
IP Address:
Enter a free IP Address from the address range used
by PCs on your LAN. The default Disk Server value is
192.168.0.2
Network Mask:
Use the same value as PCs on your LAN. The default
Disk Server value is 255.255.255.0
Gateway:
Use the same value as PCs on your LAN. If you don't
have a router or Internet Gateway, leave this at the
default value (blank).
Enable DHCP Server:
If checked, the Disk Server will provide an IP Address
and related data to PCs on request. PCs will only make
such as request if they are set to act as
DHCP clients
.
(See
Windows Client Setup
and
Mac Client Setup
for
details.)
Start IP Address:
The first value for the range of IP Addresses to be
allocated by the DHCP Server.
Finish IP Address:
The last value for the range of IP Addresses to be
allocated by the DHCP Server
Ensure that the range is large enough for the number
of DHCP clients (PCs and other devices making DHCP
requests.)
Microsoft Networking
Workgroup Name:
Normally, this name should match the
Workgroup
name used by PCs on your LAN.
Enable WINS
Check this if your LAN has a WINS (Windows Inter-
net Naming Service) Server.
WINS Server
Enter the IP Address of the WINS Server. This is
normally a system running Windows NT Server.
Содержание TS-D40G
Страница 1: ...Disk Server User s Guide...
Страница 2: ......
Страница 36: ...Page 32 This page was deliberately left blank...
