TRENDnet TS-D40G, Руководство пользователя

Страница: 11 / 42

Page 7
Disk Server Setup using Windows
? ?
For basic operation, only the following setup is required.
? ?
For the full range of options available to the Network Administrator, refer to
Chapter 3 - Administration .
Software Installation
1. Insert the supplied CD-ROM into the drive of your Windows 95/98 or Windows
NT4.0/2000 system.
2. If the SETUP program does not start automatically, run SETUP.EXE in the root
directory.
3. Follow the prompts to install the Disk Server Utility .
Using the Disk Server Utility
1. Start the program. For the default installation, use Start - Programs - Disk
Server - Disk Server Utility .
2. The screen will look like the example below. The left section displays a list of all
Disk Servers. The right section displays data about the currently -selected Disk
Server. (If no Disk Servers are listed, see the Troubleshooting section.)
Figure 2: Disk Server Utility