Page 34
Using the Disk Server's Printer
1.
In
Chooser
, select the printer type matching the printer connected to the Disk
Server.
2.
From the list on the right, select the Disk Server, then click
Create
.
(Refer to
Troubleshooting
if the Disk Server’s printer is not listed.)
3.
The new printer will be created, and can be used like any other printer.
Note:
The
Printer Object Type
, and
LaserWriter/Other
setting, on the
Printer
tab of
the
System
menu option, must be correct. See page Printer Setup for Macintosh
on page 12 for details.
Changing your Password
Once the Disk Server Administrator has created a valid
User Name
on the Disk Server
for you, you can use the following procedure to change your password.
1.
Start your WEB browser.
2.
In the
Address
box, enter:
HTTP://ip_address/user.pl
Where
ip_address
is the IP Address of the Disk Server, as in the following
example:
HTTP://192.168.0.2/user.pl
If you do not know the IP Address of the Disk Server, ask the Disk Server admin-
istrator.
3.
You will be prompted for your name and password.
Enter your existing user name and password.
4.
On the next screen, enter your new password.
5.
Save, then close your Browser.
?
The password for the
admin
user can
NOT be changed
using this method.
The
Administrator
interface must be
used.
Содержание TS-D40G
Страница 1: ...Disk Server User s Guide...
Страница 2: ......
Страница 36: ...Page 32 This page was deliberately left blank...
