TRENDnet TPE-3012LS Скачать руководство пользователя страница 92

Страница: 92 / 187

TRE

NDnet User’s Guid

TPE-3012LS / TPE-3018LS

3. Select the port to view the LLDP neighbor information and click

Detail

View LLDP System Information

•

Chassis ID Subtype:

This parameter describes the Chassis ID subtype which is

“macAddress”. You cannot change

this parameter.

•

Chassis ID:

This parameter lists the MAC Address of the switch.

•

You cannot change this parameter.

•

System Name:

This parameter lists the System Name of the switch. You can

assign the system name.

•

System Description:

This parameter lists the product name of the switch. You

cannot change this parameter

Set LLDP Port State

For each port, click the

State

drop-down list and choose from the following options.

•

Disabled:

Indicates LLDP is disabled on the port. The port cannot receive or

transmit LLDP data packets.

•

Enabled:

Indicates LLDP is enabled on the port. The port can receive and

transmit LLDP data packets.

•

RxOnly:

Indicates LLDP is enabled on the port. The port can receive LLDP data

packets.

•

TxOnly:

Indicates LLDP is enabled on the port. The port can transmit LLDP data

packets.

Note:

You can select the row labeled

ALL

to apply settings to all ports.

Click

Apply

to save the settings.

4. Click

Save Settings to Flash (menu)

5. Click

Save Settings to Flash (button)

, then click

OK.

Note:

This step saves all configuration changes to the NV-RAM to ensure that if the

switch is rebooted or power cycled, the configuration changes will still be applied.

Содержание TPE-3012LS




























































































































































































Результаты поиска

Содержание TPE-3012LS

Отзывы:

TRENDnet TPE-3012LS, Руководство пользователя, Страница: 92 / 187

Результаты поиска

Содержание TPE-3012LS

Отзывы: