TRENDnet TPE-3012LS Скачать руководство пользователя страница 22

Страница: 22 / 187

TRE

NDnet User’s Guid

TPE-3012LS / TPE-3018LS

Scheduling

Under the

Schedule Status

setting, click the drop-down list and

Enable

to enable PoE

Scheduling.

Item

Description

Nominal Power

Maximum supply power.

Consuming Power

Current consumed power.

Remaining Power

Remaining a

vailable power.

Schedule Status

Schedule status global

switch.

Name

PoE

Schedule Name.

Port List

The ports provide power in designated schedule index.

Schedule Status

The current schedule status.

Select an entry to to configure PoE port scheduling and click

Edit

Item

Description

Index

The serial number of schedule list.

Schedule Status

•

Checked:

Schedule status

is enabled.

•

Unchecked:

Schedule status

is disabled.

Name

Enter the PoE schedule name.

Port List

Select the port

provide power.

4. After completing your configuration changes, click

Apply

5. Click

Save

in the top left menu to save configuration to NV-RAM.

Содержание TPE-3012LS




























































































































































































Результаты поиска

Содержание TPE-3012LS

Отзывы:

TRENDnet TPE-3012LS, Руководство пользователя, Страница: 22 / 187

Результаты поиска

Содержание TPE-3012LS

Отзывы: