TRENDnet TPE-3012LS Скачать руководство пользователя страница 24

Страница: 24 / 187

TRE

NDnet User’s Guid

TPE-3012LS / TPE-3018LS

Type

Select the mode of daylight saving time.

•

Disable: Disable daylight saving time.

•

Recurring: Using recurring mode of daylight saving time.

•

Non-Recurring: Using non-recurring mode of daylight
saving time.

•

USA: Using daylight saving time in the United States that
starts on the second Sunday of March and ends on the
first Sunday of November.

•

European: Using daylight saving time in the Europe that
starts on the last Sunday in March and ending on the
last Sunday in October.

Offset

Specify the adjust offset of daylight saving time.

Recurring
From

Specify the starting time of recurring daylight saving time.
This

field available when selecting “Recurring” mode.

Recurring To

Specify the ending time of recurring daylight saving time.
This field

available when selecting “Recurring” mode.

Non-recurring

From

Specify the starting time of non-recurring daylight saving
time. This

field available when selecting “Non

-Rec

urring”

mode.

Non-recurring
To

Specify the ending time of recurring daylight saving time.
This field

available when selecting “N

on-

Recurring” mode.

Non-recurring
From

Specify the starting time of non-recurring daylight saving
time. This field available w

hen selecting “Non

Recurring”

mode.

Non recurring
To

Specify the ending time of recurring daylight saving time.
This field avail

able when selecting “Non

Recurring” mode.

4. After completing your configuration changes, click

Apply

5. Click

Save

in the top left menu to save configuration to NV-RAM.

Содержание TPE-3012LS




























































































































































































Результаты поиска

Содержание TPE-3012LS

Отзывы:

TRENDnet TPE-3012LS, Руководство пользователя, Страница: 24 / 187

Результаты поиска

Содержание TPE-3012LS

Отзывы: