User’s Guide
30
Enable
Click the
Enable
checkbox to enable port forwarding for the application.
Port Triggering
Port Triggering is used for special Internet applications whose outgoing ports differ from the
incoming ports. For this feature, the Router will watch outgoing data for specific port numbers.
The Router will remember the IP address of the computer that sends a transmission requesting
data, so that when the requested data returns through the Router, the data is pulled back to the
proper computer by way of IP address and port mapping rules. Click the
Port Triggering
button
to set up triggered ports, and follow these instructions:
1.
Enter the Application Name of the trigger.
2.
Enter the Outgoing Port Range used by the application. Check with the Internet application
for the port number(s) needed.
3.
Enter the Incoming Port Range used by the application. Check with the Internet application
for the port number(s) needed.
4.
Click the
Apply
button to save your changes. Click the
Cancel
button to cancel your
unsaved changes. Click the
Close
button to return to the
Port Forwarding
screen.
Check all the settings and click
Apply
to save them.
