User’s Guide
24
Click on
Edit MAC Filter List
to add the client stations MAC list.
The table could store up to
40
different MAC addresses. Please follow the format that it required when
an address is input.
Authentication Type:
Auto:
Auto is the default authentication algorithm.It will change its authentication type automatically
to fulfill client’s requirement.
Open System:
Open System authentication is not required to be successful while a client may
decline
to authenticate with any particular other client.
Shared Key:
Shared Key is only available if the WEP option is implemented. Shared Key
authentication supports authentication of clients as either a member of those who know a shared
secret key or a member of those who do not. IEEE 802.11 Shared Key authentication accomplishes
this without the need to transmit the secret key in clear. Requiring the use of the WEP privacy
mechanism.
Transmission Rate:
The rate of data transmission should be set depending on the speed of your
wireless network. You can select from a range of transmission speeds, or you can select
AUTO
to
have the Router automatically use the fastest possible data rate and enable the Auto-Fallback feature.
Auto-Fallback will negotiate the best possible connection speed between the Router and a wireless
client. The default setting is
AUTO
.
DTIM Interval:
This value indicates the interval of the Delivery Traffic Indication Message (DTIM). A
DTIM field is a countdown field informing clients of the next window for listening to broadcast and
multicast messages. When the Access Point has buffered broadcast or multicast messages for
associated clients, it sends the next DTIM with a DTIM Interval value.
Access Point Clients hear the beacons and awaken to receive the broadcast and multicast messages.
Beacon Interval:
The Beacon Interval value indicates the frequency interval of the beacon. Enter a
value between 20 and 1000. A beacon is a packet broadcast by the Router to synchronize the wireless
network. The default value is
100
.
RTS Threshold:
This value should remain at its default setting of 2346. Should you encounter
inconsistent data flow, only minor modifications are recommended. If a network packet is smaller than
the preset RTS threshold size, the RTS/CTS mechanism will not be enabled. The Router sends
Request to Send (RTS) frames to a particular receiving station and negotiates the sending of a data
