TRENDnet TEG-448WS - Switch Скачать руководство пользователя страница 26

43

 

IGMP Snooping:

 Enable or Disable the IGMP Snooping function on 

the Web Smart Switch. 

Querier State:

 Enable or Disable the Querier State of IGMP 

Snooping. 

Query Interval (60-600 sec):

 The Query Interval is the interval 

between General Queries sent. By adjusting the Query Interval, the 
number of IGMP messages can increase or decrease; larger values 
cause IGMP Queries to be sent less often. Default is 125 seconds. 

Max Response Time (10-25 sec):

 The Max Response Time specifies 

the maximum allowed time before sending a responding report. 
Adjusting this setting effects the "leave latency", or the time between 
the moment the last host leaves a group and when the routing protocol 
is notified that there are no more members. It also allows adjustments 
for controlling the frequency of IGMP traffic on a subnet. Default is 
10 seconds. 

Robustness Variable (1-255):

 The Robustness Variable allows 

adjustment for the expected packet loss on a subnet. If a subnet is 
expected to be lousy, the Robustness Variable may be increased. The 
Robustness Variable cannot be set zero, and SHOULD NOT be one. 
Default is 2 times. 

Last Member Query Interval (1-25 sec):

 The Last Member Query 

Interval is the Max Response Time inserted into Group-Specific 
Queries sent in response to Leave Group messages, and is also the 
amount of time between Group-Specific Query messages. This value 
may be adjusted to modify the "leave latency" of the network. A 
reduced value results in reduced time to detect the loss of the last 
member of a group. Default is 1 second. 

Host Timeout (130-1225 sec):

 This is the interval after which a learnt 

host port entry will be purged. For each host port learnt, a 
'PortPurgeTimer' runs for 'HostPortPurgeInterval'. This timer will be 

44 

restarted whenever a report message from host is received over that 
port. If no report messages are received for 'HostPortPurgeInterval' 
time, the learnt host entry will be purged from the multicast group. 
Default is 260 seconds. 

Router Timeout (60-600 sec): 

This is the interval after which a learnt 

router port entry will be purged. For each router port learnt, a 
'RouterPortPurgeTimer' runs for 'RouterPortPurgeInterval'. This timer 
will be restarted whenever a router control message is received over 
that port. If no router control messages are received for 
'RouterPortPurgeInterval' time, the learnt router port entry will be 
purged. Default is 125 seconds. 

Leave Timer (0-25 sec):

 This is the interval after which a Leave 

message is forwarded on a port. When a leave message from a host for 
a group is received, a group-specific query is sent to the port on which 
the leave message is received. A timer is started with a time interval 
equal to IgsLeaveProcessInterval. If a report message is received 
before above timer expires, the Leave message is dropped. Otherwise 
the Leave message is either forwarded to the port. Default is 1 second. 

IGMP VLAN Setting 

To enable IGMP snooping for a given VLAN, select Enable under 
State then press the Edit button under Static Router Port Setting, then 
select the ports to be assigned for IGMP snooping for the VLAN, and 
press Apply for changes to take effect. 

 

IGMP VLAN Setting 

Содержание TEG-448WS - Switch



































Отзывы: