23
Configuration menu
Configuring Setup Settings
There are seven options;
Port Settings, IEEE 802.1Q VLAN Setting,
Trunk Setting, Mirror Setting, IEEE 802.1p Default Priority,
Broadcast Storm Control Setting and Jumbo Frame Setting
Port Settings
In Port Settings menu (Figure 16), this screen shows each port’s status.
You can change the speed and flow control parameters by clicking on
the dropdown menu. If you want to update the link status, press the
“Refresh” button.
24
The
Link Status
in the screen will show the connection speed and
duplex mode. If there is no connection to the port,
down
will be
displayed.
Figure 16. Port Setting
Note 1: Be sure to click refresh after switching between media type (Fiber to Copper
or Copper to Fiber).
Note 2: The priority of Gigabit Fiber port is higher than Copper.
Speed:
The 1000Base-T connection can operate in Forced Mode settings
(1000M Full, 100M Full, 100M Half, 10M Full, 10M Half), Auto, or
Disable. The default setting for all ports are set to Auto. The mini-
GBIC (Gigabit Fiber) connections can operate in Forced Mode
settings (1000M Full), Auto, or Disable.
Содержание TEG-448WS - Switch
Страница 34: ......