TRENDnet TEG-30102WS, Руководство пользователя, Страница: 6 / 109

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEG-30102WS
2
Console Port
Product Hardware Features
Rear View

AC Power Connector – Connect the AC power cord to the connector and the
other side into a power outlet. (Input: 100~240VAC, 50/60Hz)
Front View

Smart Fan – Smart fans will automatically adjust speed based on
temperature and switch usage. The smart fans are hot swappable.

Reset Button – Press and hold this button for 10 seconds and release to
reset the switch to factory defaults. The System LED will flash rapidly
(orange) and turn solid (orange) to indicate the reset procedure was
successful.

Console Port – Connect the included RJ-45 to RS-232 cable access the
command line interface. The command line management interface does
not provide full command line management access to all features, only
basic features such as modifying the administrator password and switch
IP address.

Reset Button – Press and hold this button for 10 seconds and release to
reset the switch to factory defaults. The System LED will flash rapidly
(orange) and turn solid (orange) indicating the reset procedure was
successful. If using the hardware reset button to reset to factory default,
the system LED will remain orange until the first device reboot.

2.5 Gigabit Ports (1-8) – Connect network devices at 2.5G/1G/100M
speeds.

SFP+ slots (9-10) – Supports optional 10G SFP+ mini-GBIC modules.
AC Power Connector
2.5G/1G/100M
Ports
Reset
Button
10G
SFP+
Slots
LED Indicators
Smart Fans