TRENDnet TEG-30102WS, Руководство пользователя, Страница: 27 / 109

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEG-30102WS
23
4. Click Apply.
5. Click Save Settings to Flash (button), then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
Enable HTTPS/SSL (Secure Socket Layer) management access
System > SSL Settings
By default, your switch management page can be accessed using standard web HTTP
protocol which is unsecure. Enabling HTTPS/SSL management access allows access to
the switch management page using secure encrypted communication which prevents
unauthorized users from intercepting user name and password credentials. Typically,
the switch is accessed within the local network only by system administrators which
does not necessarily require additional security. It is recommended to only enable this
feature, if allowing switch management access from other networks or over the
Internet.
Note: Once HTTPS/SSL management access is enabled, HTTP management access will be
disabled forcing all access to the switch management page using secure encryption
communication only.
1. Log into your switch management page (see “ Access your switch management page ”
on page 11).
2. Click on System, and click on SSL Settings.
3. Review the settings. Click Apply to save changes.

SSL Status:
o
Enabled – Enables HTTPS/SSL management access and disables HTTP
unsecured mode.
o
Disabled – Disabled HTTPS/SSL management access and enabled HTTP
unsecured mode. (Default setting).
If enabling SSL management access, you will need to access the switch management
page using HTTPS instead of HTTP. (e.g.
https://192.168.10.200 )
Click Continue, Proceed to this website, and accept the certificate if prompted.
4. Click Save Settings to Flash (menu).
5. Click Save Settings to Flash (button), then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.