TRENDnet TEG-30102WS, Руководство пользователя, Страница: 38 / 109

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEG-30102WS
34
4. Click Save Settings to Flash (menu).
5. Click Save Settings to Flash (button), then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
Loopback Detection
Enable loopback detection
Bridge > Loopback Detection
The loopback detection feature allows the switch to detect and prevent disruption from
loops that occur on uplink or downlink switches directly connected to your switch.
1. Log into your switch management page (see “ Access your switch management page ”
on page 11).
2. Click on Bridge and click on Loopback Detection.
3. Review the settings.

State – Select Enabled to enable the loopback detection feature. Select
Disabled to disabled the loopback detection feature.

Interval – Defines the interval your switch will check for loops.

Recover Time – Defines the time period when connectivity will be restored to a
port where a loop was previously detected and blocked.
Click Apply to save changes.