TRENDnet TEG-30102WS, Руководство пользователя, Страница: 21 / 109

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEG-30102WS
17
For new IPv6 address interface, set IPv6 State to Enabled, and enter the IPv6 Unicast
Address / Prefix Length to assign to the VLAN and click Apply.
In this example, we will assign fc50::2/64 IPv6 address interface to VLAN 50.
Under System > IPv6 > IPv6 Address, you will see the updated IPv4 address interface
assigned to VLAN 50 in the table.
The VLAN with the assigned IPv6 address interface can now be used for IP routing
purposes. You can repeat the steps to create additional VLANs and assign other IPv6
address interfaces.
6. Click Save Settings to Flash (menu).
7. Click Save Settings to Flash (button), then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
Add IPv6 neighbors
System > IPv6 > Neighbor Settings
This settings allows you to manually define IPv6 supported neighboring devices on your
network.
1. Log into your switch management page (see “ Access your switch management page ”
on page 11).
2. Click on System, IPv6, and click on Neighbor Settings.
3. Review the settings. When you have completed making changes, click Apply to save
the settings.

Interface VLAN: Sets the value of the VLAN

Neighbor IPv6 Address: Specifies the neighbor IPv6 address.

Link Layer MAC Address: Specifies the link layer MAC address.
Click Add to save the entry to the list.

You can type in the specific address and click Find to find the entry to modify or
click Delete or delete the address. If the entries span multiple pages, you can
navigate page number in the Page field and click Go or you can click First,
Previous, Next, and Last Page to navigate the pages.