-
-
7
English
4. Wear protective glasses and hearing protection.
5. For long hair, wear hair protection. Work only with closely fitting clothes.
6. If the mains cable is damaged or cut through while working, do not touch the cable. Never use
the machine with a damaged cable.
7. Do not operate the machine in rain or high moisture conditions.
8. Always direct the cable to the rear away from the machine. Take care with the trailing cable
from the router and we recommend that an RCD is user at all times with this machine.
9. Contact with electric lines can lead to fire and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property damage or may cause an electric shock.
10. When working with machine, always hold it firmly with both hands.
11. Secure the workpiece. A workpice clamped with clamping devices or in a vice is held more
secure than by hand.
12. Before putting into operation, check the routing tool for firm seating.
13. Never route over metal objects such as nails or screws.
14. Keep hands away from rotating router bits.
15. After finishing work, guide the machine back into the upper starting position by actuating the
clamping lever and switch the machine off.
16. Always switch the machine off and wait off and wait until it has come to a standstill before
placing it down.
17. Protect tools from impact and shock.
18. Never allow children to use the machine.
19. Do not use blunt or damaged router bits. Blunt or damaged router bits cause increased
friction, can become jammed and lead to imbalance.
20. The allowable speed of the router bit must be at least as high as the maximum speed listed on
the power tool. Accessories that rotate faster than permitted can be destroyed.
21. Never touch the bit during or immediately after the use. After use the bit is too hot to be
touched by bare hands.
Warning: some dust particles created by power sanding,sawing, grinding, drill and
other construction jobs contain chemicals known to cause cancer, birth defects or
other reproductive harm.
Some examples of these chemicals are:
Lead from lead-based paints.
Crystalline silica from bricks and cement and other masonry products.
Arsenic and chromium from chemically treated timber
Your risk from these exposures varies, depending upon how often you do this type of work. To
reduce your exposure to these chemicals;
Work in a well-ventilated area
Work with approved safety equipment, such as those dust masks that are specially designed to
filler microscopic particles.
