-
-
8
English
TECHNICAL DATA
Rated Voltage
220-240V~50Hz
Rated Power
2100W
Rated No-load
Speed
11500~28000/min
Collet size
1/2 & 1/4 inch
Max plunge depth
50mm
Double insulation
/ll
Machine weight
4.3Kg
NOISE INFORMATION
A weighted sound
pressure
LpA
=90 dB(A)
A weighted sound power LwA =101dB(A)
LpA&KwA
3.0dB(A)
Wear Ear Protection when sound pressure is
over 80dB(A)
Vibration Information
Vibration total values (triax vector sum)
determined according to EN 60745:
Vibration emission value: a
h
= 4.90 m/s
2
Uncertainty K = 1.5 m/s²
The declared vibration total value may be used
for comparing one tool with another, and may
also be used in a preliminary assessment of
exposure.
WARNING:
The vibration emission
value during actual use of the power tool
can differ from the declared value depending on
the ways in which the tool is used dependant on
the following examples and other variations on
how the tool is used:
How the tool is used and the materials being cut
or drilled.
The tool being in good condition and well
maintained
Using the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if
any anti vibration accessories are used.
And the tool is being used as intended by its
design and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately
managed
WARNING:
To be accurate, an
estimation of exposure level in the actual
conditions of use should also take account
of all parts of the operating cycle such as the
times when the tool is switched off and when
it is running idle but not actually doing the job.
This may significantly reduce the exposure
level over the total working period.
Helping to minimise your vibration exposure
risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate)
If the tool is to be used regularly then invest in
anti vibration accessories.
Plan your work schedule to spread any high
vibration tool use across a number of days.
ACCESSORIES
Centre pin
1
Parallel guide
1
Template Guide(30mm&16mm)
1
Spanner
1
Collet
1/4 inch
1
1/2 inch
1
Dust extraction tube
1
We recommend that you purchase your
accessories from the same store that sold you the
tool. Refer to the accessory packaging for further
details. Store personnel can assist you and offer
advice.
