IQ41x Installation Instructions - Confi guring TG201251 Issue 5, 22-Aug-2014
1
InstallationInstructions-Configuring
IQ41x
Series Controllers
Important: Retain these instructions
these instructions shall be used by trained service personnel only
If the equipment is used in a manner not specifi ed by these instructions, the protection provided by the equipment may be impaired.
4
Reset to Defaults .........................................................12
5
Disposal .......................................................................12
1
Switch off Power to the IQ41x
2
Access IQ41x
CoNtENtS
1
Before Startiing Confi guation ........................................
1
2
Installation - Confi guring ...............................................
1
3
Connect to IQ4 ............................................................10
Read&AgreetoenduserLicenceAgreement
1
BeFoReStARtIngConFIguAtIon
Install the IQ41x
InstallSetonPC/Laptop
Additional Documentation Required
▪
SET Manual (TE200147)
▪
IP Tool Manual (TE200638)
▪
IQTool Monitor Applet Manual (TE201298)
▪
IQTool Addresser Applet Manual (TE201299)
▪
IQ4 Confi guration Manual (TE201263)
Note: PDF copies are included with SET installation in the
following folder: C:\...\Trend Control Systems\Documentation
2
ConFIguRAtIonPRoCeDuRe
WARNING
Opening the panel may expose
dangerous voltages.
IQ41x Installation Instructions - Mounting
(TG201250)
SET Manual (TE200147)
Prepare Ethernet Network
(if using Ethernet)
Install DHCP Server
If the IP address settings (IP address, subnet mask, default
router, WINS and DNS servers’ addresses) are to be supplied
by a DHCP server, ensure one is installed on the Ethernet
segment to which IQ41x is connected.
Install WINS Server
If host names are being used for IP addressing across a
router, a WINS server must be installed.
Install DNS Server
If email alarms are being sent, and the email server address
is identifi ed by internet domain name, a DNS server must be
installed.
IQ41x Installation Instructions - Mounting
(TG201250)
O
I
Draft
