Standard Operating Procedure
Attraction: EUROBUNGY-TRAMPOLINE
August
2011
Policy: Standard Operating Procedures Manual
Approved: Peter Raidt
Page 25 of 39
making sure the mechanism “locks”.
d)
Tighten the strap around the hip and verify the jumper feels comfortable.
e)
The carabiner should be on the outside and above the hips of the jumper.
f)
If you cannot close the strap completely, try to adjust with the buckle in the back or use
a smaller harness
g)
Put the leg straps around the legs.
h)
Close the buckle and make sure it’s locked. It will click into place. Pull on the strap to
ensure it is secure.
i)
Tighten the strap around the leg, lock the buckle, and check that it is secure and that the
jumper is comfortable. If the jumper does not fit in any of the harnesses, do not operate
attraction.
9.
The harness should fit the jumper tightly, but not so tightly that it is uncomfortable.
10.
The harness straps should rest comfortably at the top of the thighs and around the
buttocks.
11.
Make sure that the clothing of the jumper is not bunched or gathered beneath the straps.
Ask the jumper to adjust his or her clothing if necessary.
12.
Ask the jumper how the harness feels and make sure that the jumper is comfortable and
confident in the harness.
13.
Ask the jumper to voice any concerns with the harness and/or his or her comfort at
anytime during time on the attraction. Should the harness become uncomfortable for the
jumper during their time, instruct the jumper to stop their movement and lower the hoist
down so the operator can adjust the harness.
