Standard Operating Procedure
Attraction: EUROBUNGY-TRAMPOLINE
August
2011
Policy: Standard Operating Procedures Manual
Approved: Peter Raidt
Page 17 of 39
Pull tight and set the knot
4.
Frame
The aluminum frame and revolutionary design is what makes the EUROBUNG-TRAMPOLINES
unique. With this incredible layout, depending of the model, up to 5 jumpers can experience the
fun at the same time. Make sure that the frame is clean and dry while operating. Be sure to
secure all cables and bolts properly, see the construction manual for instructions.
All binding units and connection points should be completely closed and secure and
should be monitored throughout usage
.
All ropes connected to the frame should be straight and able to move freely through the pulleys.
Stop the operation immediately if any of the mentioned criteria is in malfunction!
5.
SUSPENSIONS – TRAMPOLINES
The suspensions are the elements of the “EUROBUNGY-TRAMPOLINE” that allow the jumper to
rebound and gain momentum by providing a bouncy cushion.
Minimum Size should be 7’ wide and 10’ length.
There are two types of suspensions: air trampolines for temporary use and steel frame
trampolines for permanent use. Once the jumper is standing safe on the trampoline, attach the
harness immediately like described above and then pull the hoist up slightly at first to ensure the
jumper does not fall off of the trampoline. Make sure that the jumper is always connected to
tightened elastics while on the trampoline.
The instructor should not allow any horse-play on the trampolines
.
The Instructor should not be allowed to stand onto the trampoline.
