
8/05/08
19
Section 4: Operating Instructions
4220ST & 4420ST Light Utility Vehicles 700-504M
Table of Contents
Glove Box Enclosure
Refer to Figure 4-10:
Unlock glove box by inserting key and rotating clockwise
90 degrees to the position shown. Rotate twist lock
clockwise another 90 degrees to open. To close, push
glove box lid shut. To lock while shut, rotate key 90
degrees counterclockwise and remove. Key can be
removed in locked and unlocked positions.
Figure 4-10
Cargo Box / Flat Bed Set-Up
!
CAUTION
Always load front of cargo box first and back last. Never load
back with more weight than the front.
!
DANGER
Make sure area behind cargo box is clear of personnel before
raising the cargo box. Bodily harm can result from being
pinched between cargo box and another object or from a load
dumping and/or rolling onto a bystander.
The cargo box is factory standard with removable tailgate
and side panels for changing cargo box into a flatbed.
Refer to Figure 4-11:
1.
Remove cotter pins (#6) and flat washers (#5) from
tailgate cable pins (#8). (2-places)
2.
Remove 1/4”-20 hex screws (#4) and tailgate pivots
(#1) from tailgate. (2-places)
3.
Pull gate release lever (#7) back on both sides and
remove gate (#3) from cargo box.
4.
Replace flat washers (#5) and cotter pins (#6) in
tailgate cable pins (#8) for storage.
Keyed Twist Lock
(Shown Unlocked)
23534
Figure 4-11
Refer to Figure 4-12:
5.
Remove 5 5/16”-18 hex flange screws (#10) and right
hand side panel (#9) as shown.
6.
Repeat step 5 for left hand side panel.
Figure 4-12
234698
234699