Trejon OPTIMAL UPX Series, Инструкция по эксплуатации и техническому обслуживанию, Страница: 35 / 44

Instruction manual TREJON OPTIMAL UPX plough (2010)
35
4.3 Before season start
Go through all the above points
– see section 4.2. If the machine is serviced well, it will have a
considerably longer service life and more carefree use.
4.4 At End of Season
As a minimum, the user is recommended to implement those measures that are mentioned in
section 4.2. after the ploughing season.
The plough must be thoroughly cleaned and then lubricated and serviced. Replace worn or
damaged parts. When the machine is dry, you are recommended to apply a thin coat of oil in
those places where the paint has been worn away.
The piston rods on the hydraulic cylinders must be cleaned and oiled, and then retracted so that
the plough is set in U-CONFIGURATION (see Figure 28) to prevent rust damage.
The machine should ideally be stored under cover in a dry area.
It is important to check the steel holder (A) and its screws (E). If these are damaged, they should
be replaced; when this happens, they need to be lubricated (see Figure 29).
Grease during
reassembly
A
E
Figure 29
Figure 28