BEFORE THE FIRST USE
•
Remove all packaging materials.
•
Clean the baking plates with a damp cloth or sponge.
•
Slightly grease the baking plates with a little cooking oil.
•
Take care to prevent water from running into the appliance.
PARTS IDENTIFICATION
Before using your Waffle Maker for the first time, you should become familiar with all of the parts. Read all
Instructions and Safeguards carefully.
USING YOUR WAFFLE MAKER
Before using the appliance for the first time, peel off any promotional materials and packaging materials, and
check that the cooking plates are clean and free of dust. If necessary, wipe over with a damp cloth. For best
results, pour a teaspoon of vegetable oil on to the non-stick plates. Spread over with an absorbent kitchen
towel and wipe off any excess oil.
When the appliance is heated for the first time, it may emit slight smoke or odor. This is normal with many
heating appliances. This does not affect the safety of your appliance.
•
Inset the pin plug into the power outlet, you will notice that the ready
indicator will go on, indicating that the appliance has begun preheating.
•
Allow the appliance to pre-heat until the ready indicator goes out. This
indicates that the cooking plates have reached the correct temperature
for cooking.
•
For best results, lightly spray the cooking plates with a cooking oil spray
before using. This will assist in the removal of the donuts after cooking.
•
Divide mixture into pan holes as per recipes using a jug & spoon or
fabric piping bag.
•
Note: Do not use disposable plastic piping bags as these may melt if they
come into contact with hot plates.
1.
Upper Housing
2.
Power Indicator
3.
Ready Indicator
4.
Upper Plate
5.
Bottom Housing
6.
Power Cover
7.
Bottom Plate
