Treadly TR-200B, Руководство пользователя

Страница: 23 / 26

Maintenance Continued
Lubricating the Belt
The running board and walking belt have been
pre-coated with lubricating silicone oil. The
friction between the running board and the
walking belt influences the service life and
performance of the Treadly, so it is necessary to
apply lubricating oil regularly. Apply about 0.7
ounces evenly, for each application. We
recommend that the running board and the
walking belt be lubricated with silicone oil (for
reference only) as follows:
• For users with less than three hours of
use time per week - Once every 6
months
• For users with 3-5 hours of use time per
week - Once every 3 months
• For users with more than 5 hours of use
time per week - Once every month
When you lubricate the walking belt, turn o ff
the Treadly and then unplug the power cord
from the power socket.
Lubrication steps
• Lift Treadly from the side and tilt it at a 45
degree angle.
• Lift up the belt by hand and pour the
lubricating silicone oil on the front, middle,
and back of the running board.
• Let the lubricating silicone oil flow down to
the other side of the walking belt until it
flows past the middle of the running board,
and then lay the Treadly flat.
• Finally, repeat this step to lubricate the other
side of the walking belt and running board.
• After finishing the lubrication step, start up
the Treadly and walk slowly for a few
minutes to ensure that the walking belt and
the running board fully absorb the
lubricating silicone oil.
Storage
• When not in use, store the Treadly in a dry,
safe, ventilated, cool place.
• Do not twist the power cord.
• Avoid sharp objects scratching the surface
of the Treadly.
• Do not place the Treadly under direct
sunlight or high temperatures.
Cleaning
• Use a cloth to clean the surface of the
Treadly. Comprehensive cleaning will
extend the life of the Treadly.
• Regularly remove dust to keep parts clean.
• Keep your shoes clean to avoid depositing
foreign objects into the belt, and wearing
out the belt and running board.
• Wipe the belt with a damp cloth.
• DO NOT spill water on the electrical
components or the belt.
WARNING! Unplug the Treadly's power
cord before cleaning or maintaining it.
| 23