Treadly TR-200B, Руководство пользователя

Страница: 20 / 26

Sleep And Wake Up
You can wake up Treadly by pressing the
function buttons on the handrail or by
touching the walking belt with the sole of
your foot.
Sleep
Once Treadly is powered on, if you do not
use the function buttons or walk on the belt
for more than five minutes, the Treadly
automatically enters Sleep Mode.
Wakeup
There are two ways to wake up Treadly:
1. Press any function button on the
handrail. The display window will
illuminate, and the button light will turn
on.
2. Tap your foot three times on the belt at
a constant speed. Ensure that the time
between each tap is no more than five
seconds (see picture below).
The second indication will show:
During the tap wakeup process, the middle of
the display will change with the number of
touches as shown below. First, the display
window will indicate this message:
The third indication will show:
After the third tap, the display window will light
up, and the handrail button light will turn on.
The following actions will not wake up Treadly
1. Wake action error: The foot should be in
the same direction as you would normally
step on the Treadly. If the foot is any other
direction, the wakeup will fail.
2. Wake-up time error: If you do not use the
sole of the foot to continuously tap the belt
at an even pace three times, the wake-up
fails. Please remember that the intervals
between the taps must not exceed five
seconds.
| 20