Treadly TR-200B, Руководство пользователя

Страница: 16 / 26

Manual Control Mode
Manual control mode allows you to control the speed using the handrail.
Start
1. Power on the Treadly.
2. Turn on the power switch.
3. Press the handrail’s start button.
4. Start walking slowly and accelerate.
Acceleration
Press the Acceleration button on the handrail. When you press it, the speed will
increase rapidly. The maximum speed is 5 mph.
Deceleration
Press the Deceleration button on the handrail. When you press it, the speed will
reduce by 0.1 mph.
Pause
Press the handrail’s Pause button to pause and gradually slow down to stop.
Stop
Press the handrail’s Stop button to gradually come to a halt.
Switch Modes
Press on the handrail’s Switch button to switch the mode. There are two
modes:
1. Manual Mode: This mode allows you to control the speed of the Treadly.
2. Automatic Mode: This mode speeds up and slows down based on your position on the belt.
The Treadly will automatically increase in speed if you are on the front 1/3 of the belt
(Acceleration Zone). The Treadly will automatically decrease in speed if you are on the back
1/3 of the belt (Deceleration Zone).
No-load function
If you do not walk on the machine for 10 seconds after starting your Treadly, it will automatically
stop.
Beginners should accelerate slowly. When using the handrail buttons, hold the handrail with one
hand. In case of emergency, press the Emergency Stop button. Treadly stops quickly, so hold the
handrail after lowering the speed. Place two feet on the rubber sides and press the Stop button
while holding the handrail firmly.
| 16