Treadly TR-200B, Руководство пользователя

Страница: 19 / 26

Automatic Control Mode Continued
Accelerating
To accelerate, move your center of gravity to the
front of the belt (Acceleration Zone). Keep
moving in this area to maintain automatic
acceleration (see picture below).
Constant Speed
To maintain your speed, move your center of
gravity to the middle of the belt (Retention
Zone). Keep moving in this area to maintain a
constant speed (see picture below).
Deceleration
To decelerate, move your center of gravity
to the back of the belt (Deceleration Zone).
Keep moving in this area to maintain
automatic deceleration (see picture below).
Deceleration from the Acceleration Zone
When your center of gravity moves from the
Acceleration Zone to the Constant Zone,
Treadly automatically decelerates and
maintains a constant speed.
Deceleration from the Constant Zone
When your center of gravity moves from the
Constant Zone to the Deceleration Zone,
Treadly automatically decelerates to the lowest
speed and comes to a stop.
Switch modes
If any button is pressed on the handrail or
remote controller while the Treadly is in its
Automatic Speed Mode, Treadly disables the
Automatic Speed Mode and runs the
corresponding command pressed from the
handrail or remote controller.
Stopping
When your center of gravity moves from the
Acceleration Zone to the Constant Zone, then
slows down from the Constant Zone into the
Deceleration Zone, and you continue to walk,
Treadly automatically decelerates to the lowest
speed and then stops.
To stop from the Constant Zone: When your
center of gravity moves from the Constant
Zone to the Deceleration Zone, and you
continue to walk, Treadly automatically
decelerates to the lowest speed and then
stops.
| 19
Deceleration Zone Acceleration Zone
Acceleration Zone