TQ
i
RADIO SYSTEM • 7
Before installing the TQi radio system in your model, make certain
the steering trim knob is centered. After you have installed and
bound the radio system, confirm the steering servo and throttle
servo (if installed) operate properly: turning the steering wheel right
makes the front wheels turn right (and vice-versa), and pulling the
trigger to the grip opens the throttle of your nitro engine. If either
control operates “backwards,” follow the menu tree on page 14 or
use the Traxxas Link application (#6507 TQi with Docking Base only),
to reverse the servo’s operation.
After confirming correct servo operation, use the TQi’s steering trim
knob to center your model’s front wheels so it drives straight with the
steering wheel at its neutral position. If there is not enough adjustment
to achieve this with the steering trim knob, reset the steering trim to its
center position, then remove and reinstall the servo’s steering horn to
center the steering system as close as possible. The steering trim knob
can now be used to make the final adjustments.
Repeat this process for the throttle servo. To access throttle trim, follow
the steps in the menu tree on page 14.
If your model is equipped with an electronic speed control, it will
have to be calibrated to the TQi radio system. Follow the instructions
included with your vehicle or your speed control to calibrate it properly.
Range-Testing the Radio System
Before each running session with your model, you should range-test
your radio system to ensure that it operates properly.
1. Turn on the radio system and check its operation as described in the
previous section.
2. Have a friend hold the model. Make sure hands and clothing are
clear of the wheels and other moving parts on the model.
3. Walk away from the model with the transmitter until you reach the
farthest distance you plan to operate the model.
4. Operate the controls on the transmitter once again to be sure that
the model responds correctly.
5. Do not attempt to operate the model if there is any problem with
the radio system or any external interference with your radio signal
at your location.
Higher Speeds Require Greater Distance
The faster you drive your model, the more quickly it will near the limit
of radio range. At 60mph, a model can cover 88 feet every second! It’s
a thrill, but use caution to keep your model in range. If you want to see
your model achieve its maximum speed, it is best to position yourself
in the middle of the model’s running area, not the far end, so you drive
the model towards and past your position. In addition to maximizing
the radio’s range, this technique will keep your model closer to you,
making it easier to see and control.
No matter how fast or far you drive your model, always leave
adequate space between you, the model, and others. Never drive
directly toward yourself or others.
USING THE RADIO SYSTEM
Содержание TQi 6507
Страница 1: ...owners manual MODELS 6507 6508 6509...
