background image

TQ

i

 RADIO SYSTEM • 5

Installing Batteries in the TQi Docking Base (Model #6507 Only)

Your TQi transmitter uses 4 AA batteries. The battery compartment is 
located in the base of the transmitter.

1.

 Remove the battery 

compartment door by 
pressing the tab and 
sliding the door open.

2.

 Remove the battery 

holder. Install the 
batteries in the battery 
holder. Correct orientation is 
indicated in the battery holder. Make sure 
the battery holder is plugged into the transmitter. 

3.

 Reinstall the battery door and snap it closed.

4.

 Turn on the transmitter and check the “ON” LED for 

a solid green light. 

Note

: Switching the transmitter 

on with your mobile device installed will 
automatically launch the Traxxas Link application.

If the status LED flashes red, the transmitter batteries may be weak, 
discharged or possibly installed incorrectly. Replace with new or freshly 
charged batteries. The power indicator light does not indicate the 
charge level of the battery pack installed in the model. If the Traxxas Link 
application is installed and running, there is a battery level icon  
(see image below) on the main menu bar that will give you an indication 
of the charge level of the transmitter batteries.  

Note

: The Docking Base will charge your mobile 

device as long as the transmitter is turned on.  

This feature may be switched off by accessing the Preferences screen  
in the Traxxas Link application.

TQi Docking Base Battery Charging Jack

The Docking Base incorporates a standard 
charging jack for use with optional Traxxas 
rechargeable NiMH battery pack (#3037) and 
wall charger (#6545)(each sold separately). 

Note

: The charger and charging jack will not 

charge rechargeable AA batteries installed in 
the standard 4-cell AA battery holder supplied with the TQi. 

Only use  

the charger and charging jack with the #3037 Traxxas NiMH battery.

Optional #3037 Traxxas NiMH battery installation

Use the Right Batteries

Your transmitter uses AA batteries. Use new alkaline batteries.  

Do not use rechargeable AA cells to power the TQi transmitter, as they  
will not provide sufficient voltage for optimum transmitter performance.
The #3037 Traxxas 5-cell rechargeable battery pack can be used in place 
of 4 AA alkaline cells. The #3037 battery has the same voltage (6 volts) as 
four alkaline cells.
Caution: Discontinue running your model at the first sign of weak 
batteries (flashing red light on the transmitter) to avoid losing control.

GETTING STARTED

Содержание TQi 6507

















Отзывы: